Lian Li Aluminium Lancool Iii RGB Mid-Tower Computer Casei Gaming Pc Cabinet- Black|Supports-Eatx/ATX/Micro-ATX/Mini-Itx|Pre-Installed 3X140Mm Argb…
₹16,225.00
Lian Li Aluminium Lancool Iii RGB Mid-Tower Computer Casei Gaming Pc Cabinet- Black|Supports-Eatx/ATX/Micro-ATX/Mini-Itx|Pre-Installed 3X140Mm Argb…
- Black, Mid- Tower, (D) 526 x (W) 238 x (H) 523 mm, Aluminum 4.0mm tempered glass (both sides)
- Behind MB Tray: 2 X 2.5ʹʹ SSD , Hard Drive Cage: 4 X 3.5ʹʹ HDD/2.5ʹʹ SSD , Behind the Right-side Shroud Panel: 3 X 2.5ʹʹ SSD Above , PSU Chamber:3 X 2.5ʹʹ SSD
- Power Button, Reset Button, C Mode, M mode, USB 3.0 * 2, Audio *1
- Pre-Installed Fans : 3 x 140mm AEGB Front Fans and 1 x 140 mm PWM Rear Fan ; Fan Support : Front (multi-way bracket): 3 X 120mm or 3 X 140mm, Above PSU Chamber: 3 X 120mm or 2 X 140mm Top: 3 X 120mm or 3 X 140mm Rear: 1 X 120mm or 1 X 140mm ; Radiator Support : Front / Top / Bottom : 360mm
- GPU Length Clearance : 420mm(Max) ; CPU Cooler Height Clearance : 185mm(Max) ; Dust Filter : 1 x Bottom
Related Products
Lian Li Aluminium Lancool Iii RGB Mid-Tower Computer Casei Gaming Pc Cabinet- Black|Supports-Eatx/ATX/Micro-ATX/Mini-Itx|Pre-Installed 3X140Mm Argb…
₹16,225.00
Ari –
Great for Matx builds, superb airflow and Lian Li’s impeccable quality.
Kevam Patel –
The title says it. This is the best overall case evaluating both the form and function. I purchased the Snow White Lancool II Mesh which is stunning to look, every single part of the case is white, the cables and cable ties are white too. Even the screws are silver.
The case is pretty heavy and is very very solidly built. The case weighs almost as much as my previous case with a full PC build!
As with the airflow, it is quite literally THE best airflow case available in India, and even overall in the whole world, only second to the Fractal Torrent case, which is almost triple the price of this one, so this one wins overall.
As for the actual performance, I uses to own a Cooler Master MB520 RGB cabinet which had similar triple front fans but it had an acrylic panel with vents on sides and below. And that thing choked my PC with hot air building up inside the case.
This case, let me tell you, dropped my CPU temps by almost 25°C and GPU by 20°C which is pretty darn crazy! And it’s probably unbelievable to you as well, but it is true.
In my previous case I used triple intake and triple exhaust fans and still the airflow was so bad my CPU and GPU temps crossed 80 and 70 respectively. In this case I’m using the stock front fans plus two Silverstone AB120R fans as exhaust and now my GPU and CPU temps both hover around 55-58°C. That is crazy! I was confused whether to get an AIO CPU Cooler to drop temps or get this airflow case, and boy, this was the best decision I could’ve made!
abhijith ps –
The media could not be loaded.
As the title says, it’s a great case, both from the function and form perspectives. Let’s review these two separately –
A. Function – As a rig builder, you get ample space to place your motherboard. It supports up to E-ATX but hardly anyone uses those so even ordinary ATX boards will leave plenty of room. The wire routing holes are plenty and have neat rubber flaps installed for holding wiring in place. Cable management in this section is a breeze thanks to the space and the good hole locations.
The basement is another story. PLEASE don’t install your PSU before putting the hard disk in the enclosure meant for it. If you do, you will have a miserable time screwing in the HDD unless you have micro-sized screw driver handles. The front screws had to be installed by pushing the screw driver in between the front fan blades!
Again, the basement doesn’t leave space for tucking in wires. It’s a wrestling match at best so keep only those cables that you need (if you have a modular/semi-modular PSU).
Included wiring and screws are good enough in quantity and quality. Nothing fancy, just easy to install and easy to use.
Airflow is good though not 200mm good since the fans are partially blocked. But excellent space management means temps stay fine.
Style – Nothing to complain about here. Front fans look awesome when synced with your motherboard. The massively heavy glass side panel adds to the style and the overall form factor just screams sexy all the way.
Verdict – 4.5/5 – A great case that lives up to Lian Li standards. With good cable management (or decent one, as I barely manage) it looks awesome. The basement is a misery but most cases today have some variant of this so we just have to grin and bear that. Otherwise a perfect companion to your ARGB components.
Samuel –
Looks great, is easy to work with, and has a lot of space for big gpu’s.
S. Dey –
The air throughput is absolutely superb.
And that’s coming from a guy running 3090 FE and a 13900KF (if you know, you know).
Basically a well functioning space heater rofl.
The removable glass panel is great for accessing internals quickly, and cable management absolutely sublime. Perfect negative pressure system I’ve ever used, though certainly could do positive. Those front fans are crazy good.
Caveats:
– I wish it was about an inch taller (from the base of power area) though so I could fit an extra gfx card on the bottom for more monitors.
– The SSD access isn’t bad considering the airflow design, but wish it was a bit easier – as a guy who constantly works and switches drives.
– power management panel on bottom is a bit funky, but you get used to it and it grows on you.
– bit tight for the LGA1700+ chipset mobo’s (gaming type boards have large heat sinks everywhere).
Pros:
– best cable management I’ve ever seen in a sub $300 case.
– best airflow period. feeding off previous: direct air pathways across board and heat sinks. HIGH volume. Unless you are building your own water cooling system (mobo, gfx, and cpu), and assuming you aren’t using Peltier with liquid nitrogen, this is the best you’re gonna get in my opinion.
– Tons of room considering it’s not a “full tower”.
Shoutout to GamersNexus for doing thorough reviews on all the latest and greatest computer cases, and I mean THOROUGH, which led me to this product.
Barry –
This case is very well constructed. The powder coating is perfect, and the color is just right. I love the hinged glass side windows that are removable. The case layout details are designed just right for cable management. All the vented panels allow for great air flow. The only complaint I have is with the doors to the lower section of the case where the power supply and HD brackets are located. These doors need to be removable because they get in the way sometimes. I am very pleased with this case and would recommend it to anyone to purchase.
Samuel –
Perfect size case has enough room for whatever you need. Also has amazing air flow
abhijith ps –
best case for air cooling and front fans can be controlled by argb header or by argb hub by switching to 8th mode by pressing M button on the top . The sturdiness of the cabin is extremely good and heared built quality is also good.but the item i recieved was defective due to that i cant tell about build quality. Front panel have plenty space for radiators with push and pull fans .easy for cable management. The shipping was good delivery on time but after sales support is not good shown the damage and amazon accepted replacement but no further updates so i purchased side panel from other site .
Ari –
This is easily the best PC Cabinet I’ve owned so far!
The case has excellent airflow optimization which made a sizeable impact on my system temperatures. It came with 2x140mm PWM fans in the front and 1x120mm PWM fan in the rear and also has a PWM fan hub which lets you control fan speeds from the front panel switch.
The interior is extremely spacious which makes it very comfortable to build your system within the cabinet and not get any cuts or bruises
The best part about the case however is the thought put into cable management. The back of the system has detachable covers that help hide any cables, and there is plenty of room to route your cables and keep things as tidy as possible.
USB-C port for the front panel came pre-installed with the case but you will need to make sure your motherboard has a 3.1 Gen 2 header if you wish to use it.
The one downside to the cabinet is the big open gap right underneath the front panel mesh. It isn’t visible from any regular angles, but it does mean that dust can easily enter your rig.
You can cover it up with a tape or a dust filter but it will have a slightly negative impact on the temperatures.
GOA –
I am so impressed by this company. Amazing cabinets.
Everything is so excellent. The all glass. The space for wire management. The openings for air travel and everything else is so so good.
I am glad I discovered this company. Before this, I was with Circle, Ant, which has lovely products too.
The price is much higher than the above-named, but it is worth every paisa, considering the pro-grade quality.
The built-in ARGB lights are too awesome—either the static or the flashing option. Great looks. Everyone is highly impressed by my rig and thinks more highly of me than they should ;). It is meant to be a joke, but yes, it gives the impression that this is a rich man’s gizmo.
IT LOOKS SO AWESOME. All white, all glass, all see-through, and all sleek as any high-grade product.
Maitrey –
Foi muito satisfatório montar meu setup nesse gabinete, tudo é muito fácil. Continuarei usando Lian Li no futuro. Produto belo e de extrema qualidade.